Pedestal Mold Set
Pedestal Mold Set
This is our new pedestal mold set. Easy to use and easy to move. When you buy most pedestal molds they are expensive and the cast from them is very heavy and you're stuck with one design if you want a different design you have to buy another pedestal mold. Not with our mold, it solves these problems. With our panel construction, you can have several different designs for the price of one pedestal mold. Its lightweight design enables you and your customers to be able to move the pedestal around with its modular design it makes setting up your new Concrete pedestal a breeze. Assemble the center sections. Now you are left with three sections that you can easily move around. Once you place the center section into the locking groove of the base it makes a very sturdy pedestal and we also offer a top That will turn your pedestal into a nice planter.
This is a full set of concrete molds. You will get 2 base molds and 4 side molds. This standard kit has plain sides. If you would like other designs in place of the plain please email me your choice.
Measures 16” x 19” x 18” Tall
Made from 3/16 or made from " $350.00
You will assemble the four sides while they are sitting inside the base, but you can leave the base loose so as to separate them later to make it easier to move. Will be updating instructions and adding a video as soon as possible. This video is roughly how it goes together with the exception mine can be bonded together with concrete only and has a grooved base for extra strength.
Pouring the 4 sides with wire in them you can then put them together by grouting or buttering up each inner corner with concrete, this will then lock in each corner together or pour bolts into each corner and bolt the corners. You can also use Masonry Adhesive.