Paint on your base coat and make sure to thin
your first coat with water, also wet the plaque
lightly with water. Which this one is white paint
as the base color.
Next dry brush on your next color, make sure to
keep your brush at a low angle and drag it over
your statue, if the angle gets too steep or you have
too much paint you will start to paint in the letters.
Last you can add your detail colors and seal the statue.
Other than drying time you should be able to do this in
under 15 minutes or less. Most any latex paint will work
fine for painting as long as the first coat is thinned down
enough to bond. There are many other ways to do this and
we will be covering more ways of painting and finishing