Jesus on the Cross Concrete Mold

IMG_3129.jpg
IMG_3092.JPG
IMG_3129.jpg
IMG_3092.JPG

Jesus on the Cross Concrete Mold

from 29.95

Jesus on the cross, a great selling statue for memorials, this is a two-piece dump out first you cast both molds as you normally would a dump out mold, once they are dry lightly wet the inside of the base then insert the cross takes a mortar mix or grout and fill in around the cross. The cross will need to be secured until the mortar has set once it has set you will have a sturdy good looking statue to display. This is very easy to do, anyone can do it. The cross shown has been acid stain and then a sealer has been applied. If you would like to try this we have instructions on this site under help that will walk you through the process and has a link where you can buy supplies to do it and should you need more help I'm always here.

Jesus on the cross, it is 18" tall and will come with two molds one for the cross and one for the base. Plastic Concrete Molds made from ABS.

Select thickness:
Quantity:
Add To Cart