Bottom for Pedestal or Planter Mold

IMG_3602.jpg
IMG_3502.jpg
assem exploded.jpg
IMG_3602.jpg
IMG_3502.jpg
assem exploded.jpg

Bottom for Pedestal or Planter Mold

50.00

19" x 16" x 2.25" This is the bottom and the top for the pedestal.

This is the base mold only and is used for the top and bottom.

You would need to pour it twice for a Pedestal and once for a planter

or a fountain.You also need at least one side by pouring the 4 sides with wire in them you can then put them together by grouting or buttering up each inner corner with concrete, this will then lock in each corner together.You can also use Masonry Adhesive .

You will assembly the four sides while they are sitting inside the base, but you can leave the base loose so as to separate them later to make it easier to move. Will be updating instructions and adding a video as soon as possible. This video is roughly how it goes together with the exception mine can be bonded together with concrete only and has a grooved base.

Quantity:
Add To Cart